Mineral Powder equipment
- LM Series Vertical Roller Mill
- Hammer mills
- T130X reinforced ultrafine mill
- Raymond Roller Mill
- MTW Continental Trapezoid Mill
- SCM Super-micro mill
- MTM Trapezium Roller mill
- High Pressure Mill
- Ball mill
T130X reinforced ultrafine mill
T130X reinforced ultrafine mill is mainly used in metallurgy, building materials, chemicals, mining of minerals such as grinding materials processing, it can ground feldspar, calcite, talc, barite, fluorite earth, rare marble, ceramic , bauxite, manganese ore, iron ore, copper ore, phosphate rock, red iron oxide, slag, clinker, activated carbon, dolomite, granite, yellow iron oxide, soybean meal, chemical fertilizers, compound fertilizers fly ash, bituminous coal, coke, lignite, sand, magnesite, gold, red clay, clay, kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, rhyolite stone, muddy green rock, rock, leaf wax , shale rock, stone dwelling, gypsum, graphite, insulation materials, processing of all minerals with moisture below 6%, non-flammable or explosive.
Main Technical Parameters
1, Main Unit Parameters
|Name||Unit||Specifications, technical data|
|Roller diameter × height||(mm)||Ф410×210|
|Grinding ring diameter × height||(mm)||Ф1300×210|
|Host speed||Rev / min||103|
|Max feed size||(mm)||<30|
|Rev / min||T||18|
Note: 1. The output in the table are from line with an sieving rate of 80% of their final products.
2.The parameters and the shape cbmges of machines are subject to shipped operating and maintenance manual with machine.
2. Equipped Power System
|Name||Item||Unit||Specifications, technical data|
|spindle speed||Rev / min||1480|
|Motor of classifier||model||Y16L-4|
|spindle speed||Rev / min||1460|
|Motor of elevator||model||Y100L2-4|
|spindle speed||Rev / min||1430|
|Motor of Fan||model||Y280M-4|
|spindle speed||Rev / min||1480|
|Motor of Jaw Crusher||Jaw Crusher Model||PE 250×400|
|spindle speed||Rev / min||970|
Note: 1. The parameters and the shape cbmges of machines are subject to shipped operating and maintenance manual with machine.
T130X reinforced ultrafine mill is a new facility designed by SBM expert based on statistical analysis and a large number of suggestions from users and based on the innovative design of the super pressure trapezoidal mill. This model has superseded and optimized in the structural characteristics of trapezoidal MTM mill, and it also formed its own unique characteristics:
1. The body connected to the base of all soft contact without rigid contact
This avoid body vibration to analyzer, improved the accuracy of the analysis.
2. The base made of high strength ductile cast iron
Ductile cast iron has the performance of damping force of molten steel, and good impact resistance.
3. Use of Germany Flender reducer
It fully exploited the technical advantages of professional manufacturer to improve the stability of the machine.
Reducer and motor is driven by the triangle belt for transmission for overload protection.
4. The coupling of the elastic sleeve is used in the main unit and the gearbox, which avoided the phenomenon of easily breaking nylon pin, thus improving the reliability of equipment.
5. Analyzer machine applies high-density blade
The classifier uses high-density blade that can increase the fineness of powders and the production capacity. Practice shows that in the case of velocity remained uncbmged, the density of the leaves can increase the fineness of the finished products. In other words, in the case of the same finesse, high-density blade is driven by a lower rate tbm that of low density, thus reducing air resistance and increasing production.
Adopting a new structure of the blade wheel prevented the escape of the coarse powders.
6. Analyzer with a frequency control
It adopts the variable voltage and variable frequency to save more energy tbm the electromagnetic ones, and with the characteristics of accurate control, flexible process control, and high degree of automation.
7. Use of dust bypass collector
The dust bypass collector has an insulation cavity to reduce dusty gas escape from the lower vents. Compare with other dust collector, the bypass dust collector are high-efficiency and less pressure loss, particularly for collecting dust particles that is difficult to collect by the general collectors.
8. Equipment layout of the equal resistance design The equal resistance arrangement to avoid using of two different dust collector outputs power, improved dust collector’s performance, reduced internal circulation, and increased production of the mill.
9. Two collector discharge ports and dust collector are of a straight line arrangement to facilitate the materials centralized collection, which is labor saving and easy packing.
10. Establishing maintenance platform to make the mill maintenance more convenient and secure.
II. The composition of equipment
T130X mill mainly consists of the host, reducer, analyser, maintenance platforms, fan, bypass powder collector, electric control cabinet and so on. Auxiliary are of the jaw crusher, bucket elevator, electromagnetic vibrating feeder, storage bin and so on.
III. Working Principle
Bulk materials are crushed by jaw crusher to the desired size, by the elevator sent to the storage hopper, and then the vibrating feeder evenly send the material into the host and continuously grinding in mill room, after grinding, the powder will flow up by the wind machine, and classified by the classifier, the standard powder will flow through the bypass pipe into the powder collector, the collection were isolated by a valve discharge, this is final powder. Airflow flow through the top back pipe of the bypass collector to centrifugal fan, the air system is closed loop negative pressure that ensured the production site environment security.
You may interested in:
- Permanent magnetic oil filter in Nigeria, Indonesia and India
- Magnetic filter bars in Nigeria, Indonesia and India
- Sand filter for aquarium in Nigeria, Indonesia and India
- Vacuum drum filter in Nigeria, Indonesia and India
- Beer filter press in Nigeria, Indonesia and India
- Valve sand filter in Nigeria, Indonesia and India
- Magnetized water filter in Nigeria, Indonesia and India
- Common crushing processes of ore dressing plant are there? 06-21
- Ore crushing and grinding generally includes the steps? 06-21
- How to determine the most reasonable particle size of crushed minerals? 06-21